Janome 4300QDC - Eset All to Default; Uto off Timer

26
c To reset the customized settings, press “ ” on the
cursor key.
To cancel the reset, press “ ” on the cursor key.
• Reset all to default
The following customized settings can be reset to the
original settings (factory default settings).
 uer sound setting
 Needle stop position setting
 Key position adjustment
 utooff Timer setting
z Enter the setting mode. Press the mode key 3
times to enter the reset mode.
x Press “ ” on the cursor key.
The conrmation screen appears.
z
x
c
v
v The screen will back to the reset mode.
Press the memory key to exit the reset mode.
• Auto-off timer
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
The machine will be turned off if you do not use the
machine within the time period set by this timer.
z Enter the setting mode. Press the mode key 4 times
to enter the auto-off timer setting.
The default auto-off timer setting is 7 hours and “07”
sign appears on the screen.
x Press the cursor key to increase or decrease the
setting value.
The auto-off timer can be set from 1 to 12 hours.
If you wish to turn off the timer, press and hold the
cursor key until “oFF” sign appears on the screen.
c Press the memory key to apply the setting.
z
x
c