56
Drawn work uses the same method as fringing. Choose
a rm, woven fabric like linen where threads can be
removed easily.
z Carefully cut the fabric on the grain. Determine the
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
z
x
c
x Sew down the left side, guiding the fabric so the right
hand stitches fall in open space. fter nishing the left
side, turn the fabric around 180°. Sew down the other
side.
c Remove the yarn or fabric threads between the
stitching.
Drawn Work
q Stitch pattern: MODE 2: 37
w Thread tension dial: 1 to 4
e Presser foot: Satin stitch foot F
weq
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
annel. If you use light weight fabric, apply a tear away
backing for support.
Sew from the center of the design outward.
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q Auto-lock button
Cross Stitch
q Stitch pattern: MODE 2: 90
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
Open toe satin stitch foot F2
* The stitch patterns 91-93 in mode 2 can also be used.
To Next Page
Loading...
