EasyManua.ls Logo

Janome 4300QDC - Pintucking; Fringing

Janome 4300QDC
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
4
weq
Fold the fabric with the wrong sides together.
Place the folded fabric under the blind hem foot.
Align the edge of the fold with the guide on the foot, and
lower the foot.
Sew while guiding the edge of the fold along the guide.
Open the fabric and press the tuck to one side.
Pintucking
q Stitch pattern: MODE 1: 4
MODE 2: 04
w Thread tension dial: 3 to 6
e Presser foot: Blind hem foot G
Fringing adds a special touch on table linens and shawls.
hoose a rm, woven fabric like linen where threads can
be removed easily.
z Carefully cut the fabric on the grain. Remove a single
strand of yarn or thread where the fringing is to begin.
x Sew down the left side so the right hand stitches fall
in the open space.
c Remove all excess yarn located to the right of the
stitching and create a fringe.
z
x
c
Fringing
q Stitch pattern: MODE 2: 37
w Thread tension dial: 1 to 4
e Presser foot: Satin stitch foot F
4
weq
NOTE:
The “A” foot is displayed on the LCD when straight
stitch pattern 04 is selected. However, use blind hem
foot G when sewing pintuck.

Table of Contents

Other manuals for Janome 4300QDC

Related product manuals