Janome 4300QDC - Zipper Sewing

47
Place the right sides of the fabric together.
Attach the zigzag foot and seam up to the end of the
ipper opening, with a  cm (131) seam allowance.
Reverse the stitch to fasten the seam.
Manually increase the stitch length to 5.0 and baste the
zipper opening with the thread tension loosened to 1-3.
t End of the zipper opening
y  cm (131)
u Basting
i Reverse stitches
o Seam stitches
Fabric preparation
dd 1 cm (3) to the ipper length. This is the overall
opening size.
q Right side of the fabric
w 1 cm (3)
e Opening size
r Zipper length
t End of the zipper opening
Zipper Sewing
q Stitch pattern: MODE 1: 1
MODE 2: 01
w Thread tension dial: 1 to 4
e Presser foot: Zigzag foot A
Zipper foot E
Attaching the zipper foot
Fit the pin on zipper foot E to the groove on the foot
holder.
q Groove
w Pin
(A): To sew the left side of the zipper, attach the zipper
foot with the pin on the right-hand side.
(B): To sew the right side of the zipper, attach the zipper
foot with the pin on the left-hand side.
t
y
o
q
w
er
i
u
q
w
(A) (B)
t
4
weq