EasyManua.ls Logo

Janome MC6600P - Variety of Presser Feet and Their Uses

Janome MC6600P
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
1
2
3
4
5
6
8
7
9
10
11
12
13
Variety of Presser Feet and Their Uses
1 Zigzag foot A:
This is the most versatile foot. It can be used for various
stitches including straight stitches and zigzag stitches. It is
designed to achieve firm and neat seam results.
2 Overedge foot C:
This foot is exclusively for overedging. The brush on the
foot effectively prevents skipped stitches on the raw edge of
fabrics.
3 Rolled hem foot D:
This special foot is for sewing a rolled hem. The curl of the
foot helps to form a hem at a constant width.
4 Zipper foot E:
This foot is for sewing zippers. The zipper teeth are guided
through the grooves on the bottom of the foot.
5 Satin stitch foot F:
This clear plastic foot is ideal for satin stitches and
decorative stitches. The center groove on the bottom of the
foot ensures smooth feeding of dense stitches.
6 Craft foot F-2:
This is an open toe satin stitch foot for patchwork and
appliqué.
7 Blind hem foot G:
This foot is specially designed for blind hemming. The guide
on the foot helps feed the fabric and sew a straight and
nearly invisible blind-hem.
8 Cording foot H:
This foot is specially designed to hold one or three strands
of cording to create braiding.
9 Overcasting Foot M:
This foot is specially designed to simulate professional style
overlocking. The wires on the foot effectively prevent the
fabric edge from puckering or rolling.
10 1/4” Seam foot O:
This foot is useful for patchwork piecing. The guide on the
foot maintains an exact 1/4” (0.7 cm) seam allowance.
11 Basting/Darning foot P-2:
This is a special foot for basting. It holds the fabric while
taking a stitch, synchronizing with the needle bar
movement. This foot can also be used for free motion
embroidery or quilting.
12 Automatic buttonhole foot R:
This foot is for buttonholes and for darning. Place a button
in the button holder on the rear of the foot. This
automatically sets the buttonhole size.
13 Dual feed foot AD:
This is a special foot for hard-to- feed materials. This foot
effectively prevents fabrics from shifting and puckering. It is
great for quilting and matching plaids.

Table of Contents

Other manuals for Janome MC6600P

Related product manuals