63
Eyelet
Machine Setting
Pattern: 23 (Mode 3)
Thread tension:1-4
Presser foot: Satin Stitch foot F
Foot pressure: 3
The eyelet is used for belt holes etc.
To sew
Depress the foot control to sew.
The machine will sew an eyelet and stop automatically
when completed.
Open the eyelet with an awl, punch or pointed scissors.
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
If the eyelet gap opens, press “—“ on the stitch length
adjusting button.
If the eyelet overlaps, press “+“ on the stitch length
adjusting button.
1 Eyelet gap opens
2 Eylet overlaps
NOTE:
The shape can be adjusted within L1 to L3 (default
setting is L2).
2
3
To Next Page
Loading...
