69
Example: Pattern 27
Select pattern 27.
Press the elongation button.
Elongation ratio is indicated in multiples of the
original pattern length.
Start to sew.
X 1 X 2 X 3 X 4 X 5
Machine Setting
Pattern: 27 (Mode 3)
Thread tension:1-4
Presser foot: Satin Stitch foot F
Foot pressure: 3
Elongation Sewing
z
x
c
Programming a pattern combination with an
elongated pattern
Example: Programming pattern 27 and its elongated
image.
Select pattern 27 in the mode 3.
Press the memory key.
Select pattern 27 in mode 3.
Press the elongation key to change its elongation
ratio to X2.
Press the memory key. Start sewing.
z
x
c
v
b
NOTE:
If you press the auto-lock button in the middle of the
pattern, the machine will stop automatically after the
current pattern is completed.
To Next Page
Loading...
Need help?
General
