Janome MC6600P - The Help Button; Selecting the Pattern

27
The Help Button
Pressing this button will show alternative applications of
the selected pattern.
Example: When pattern D1 has been selected.
Each time you press the help button, the LCD will show as
follows:
The zigzag foot and quilting bar for quilting will be
shown.
1 Presser foot
2 Quilting bar
3 Foot pressure
4 Indicate there are more pages to show
The rolled hem foot for rolled hem will be shown.
The zipper foot for zipper sewing will be shown.
Step-by-step instructions how to engage and
disengage the dual feed device.
Selecting the Pattern
Mode 1: Press one of the numeral buttons corresponding
to the desired pattern.
Mode 2 - 3: Enter the 2-digit pattern number by pressing
the numeral buttons.
(Example: Pattern 27 mode 3)
The LCD screen will show the pattern number, stitch image
then main display for the selected pattern.
1 Pattern Selection Button
2 Pattern Number Display
3 Main Display
1
2
3
1
2
3
4
1
z
x
c
z
x
c
v
v