Janome MC6600P - To Disengage the Dual Feed Device; Detaching the Dual Feed Foot

14
1
2
1
3
4
5
3
To disengage the Dual Feed Device
Pull down the Dual feed device and swing it to
the rear to disengage. Release the Dual feed
device slowly.
2 Dual feed device
Detaching the Dual Feed Foot
Raise the needle and the presser foot lifter
to its extra lift position.
1 Presser foot lifter
Loosen the thumb screw and remove the Dual feed
foot.
Attach the foot holder to the pressure bar and
tighten thumb screw firmly.
5 Foot holder
6 Pressure bar
3 Thumb screw
4 Dual feed foot
4
Set the presser foot lifter to normal position.
z
x
z
x
z
x
c
z
x
c