57
Machine settings
Pattern: 18 (mode 3)
Thread tension: 1 - 5
Presser foot: Automatic Buttonhole foot R
Foot pressure: 3
Round-end buttonholes (#16, #17)
Machine settings
Pattern: 16 (mode 3) or 17 (mode 3)
Thread tension: 1 - 5
Presser foot: Automatic Buttonhole foot R
Foot pressure: 3
Press the stitch width adjustment key, the adjustment
window opens.
Press “+” to make the buttonhole wider.
Press “–” to make the buttonhole narrower.
q Stitch width 5.5
w Stitch width 6.5
e Stitch width 7.0
* The stitch width should be adjusted between 5.5 to 7.0.
Adjusting buttonhole stitch length on pattern #18
* The stitch length should be between 0.3 to 0.8.
* Use an Eyelet punch to open a keyhol buttonhole.
* The sewing procedue is same as buttonhole #14
Adjusting buttonhole width on stitch pattern #16
Press the stitch width adjustment key, the adjustment
window opens.
Press “+” to make the buttonhole wider.
Press “–” to make the buttonhole narrower.
q Stitch width 2.5
w Stitch width 4.0
e Stitch width 5.5
* The stitch length should be adjusted between 0.3 to 0.8.
Adjusting buttonhole stitch length on pattern #16
* The stitch length should be between 0.3 to 0.8.
Adjusting buttonhole width on stitch pattern
#18
* The sewing procedue is same as buttonhole #14
(see pages 50).
* Instead of opening buttonhole with seam ripper, open
a using hole by punch.
Keyhole buttonholes (#18)
qwe
Punch
qwe
To Next Page
Loading...
