Janome MC6600P - Threading the Machine

19
1
3
2
Threading the Machine
Draw the thread in order from to .
Raise the presser foot lifter. Press the up/down needle
button twice to raise the needle to its highest position.
Turn the power switch off.
Pass the thread through the guide on the thread
guide bar from behind.
1 Spool Holder
Pass the thread through the right thread guide.
2 Right Thread Guide
Hold the upper thread with both hands as shown
and slip it under the thread guide plate.
3 Thread Guide Plate
Draw the thread toward you and pass it into
the left thread guide. Draw the thread along the
right channel.
4 Left Thread Guide
5 Thread Guide 2
NOTE:
Be sure to use the spool holder to secure the thread
spool in place.
5
z
x
c
v
v
b
n
m
,
.
4
z
.
z
x
c
v