Janome MC6600P - Darning Operation

58
Machine settings
Pattern: 20 (mode 3)
Thread tension: 1 - 5
Presser foot: Automatic Buttonhole foot R
Foot pressure: 3
Machine settings
Pattern: 19 (mode 3)
Thread tension: 1 - 5
Presser foot: Automatic Buttonhole foot R
Foot pressure: 3
z Sew the left row.
x Sew the front bartack.
c Sew the rear bartack and right row. The machine will
automatically stop when buttonhole sewing is finished.
NOTE:
If the last few stitches of the right row extend beyond the
bartack, make the stitch length shorter to correct it.
Knit buttonhole (#19)
Knit buttonhole (#20)
z Sew the left row.
x Sew the front bartack.
c Sew the rear bartack and right row. The machine will
automatically stop when buttonhole sewing is finished.
NOTE:
If the last few stitches of the right row extend beyond the
bartack, make the stitch length shorter to correct it.