4
To remove:
Remove the face plate, top cover and belt cover.
2. Loosen the setscrews A, B, C, D and E (5 pcs.).
3. Disconnect the LCD connector and printed circuit
board K connectors (2 pcs.) from the printed circuit
board A, and remove the front cover.
To attach:
4. Follow the steps of removal procedure in reverse.
Setscrew B
Setscrew D
Changing external parts (4)
Front cover
Setscrew C
Front cover
Printed circuit board A
Setscrew E
Setscrew A
Printed circuit
board K
connector
LCD
connector
To Next Page
Loading...
