Janome Memory Craft 8200QC - Selecting the Patterns

JanomeFlyer.com
24
Selecting the Patterns
Mode 1
Youcanselectthefollowingstitchpatternsdirectlyby
pressing the pattern keys.
q Pattern keys (Number keys)
q
Example: To select stitch pattern 4 in mode 1
When the power switch is turned on, the direct stitch
pattern selection (mode 1) is set automatically.
Press the pattern key 4 to select the stitch pattern 4.
Now pattern 4 (mode 1) is selected.
Mode 2 – 6
To select stitch patterns in modes 2–6, first press the
mode key w to select your desired mode. Each time
you press the mode key, the mode number e indicated
on the left side of the screen will change, and the mode
changes as follows,
Mode 1: Direct pattern selection
Mode 2: Utility stitch pattern selection
Mode 3: Decorative stitch pattern selection
Mode 4: Number and letter selection
Mode 5: European accented letter selection
Mode 6: 9 mm monogram selection
Example: To select stitch pattern 53 in mode 3
z Turn the power switch on. Press the mode key twice
to select mode 3.
x Press the number keys on the touch panel. First press
key 5 and then press key 3.
c Now pattern 53 in mode 3 is selected.
z
x
c
w
e
e
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide