Janome Memory Craft 8200QC - Blind Hemming; Blind Hemming Fabric Folding and Sewing

JanomeFlyer.com
40
Multiple Zigzag Stitch (Tricot stitch)
Machine settings
q Pattern: MODE 2: 10
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
q
e
w
r
This stitch is used to finish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
Overcasting Stitch
Machine settings
q Pattern: MODE 2: 11
w Thread tension: AUTO
e Presser foot: Overcast foot M
r Foot pressure: 5
q
e
w
r
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams flat.
Place the fabric edge next to the guide of the foot and
then sew.
q Edge of fabric
w Guide
NOTE:
The stitch width cannot be changed.
w
q
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide