EasyManua.ls Logo

Janome Memory Craft 8200QC - Free Motion Quilting (Continued); Changing the Presser Foot for Quilting; Free-Quilting with Darning Foot

Janome Memory Craft 8200QC
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JanomeFlyer.com
62
Fagoting
Machine settings
q Pattern: MODE 3: 19
w Thread tension: AUTO
e Presser foot: Satin stitch foot F
r Foot pressure: 5
* Stitch patterns (mode 2), (mode 1) (mode 3)
can also be used.
q
e
w
r
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear away backing 0.5 cm
(3/16˝) apart.
q 0.5 cm (3/16˝)
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After finishing sewing, tear away the paper.
Scallop
Machine settings
q Pattern: MODE 3: 25
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
* Stitch pattern (mode 3) can also be used.
q
e
w
r
Sew scallops 1 cm (3/8˝) from the fabric edge.
Trim the allowance close to the stitches.
Make sure not to cut the stitches.
q
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide

Table of Contents

Related product manuals