Janome Memory Craft 8200QC - Correcting Distorted Stitch Patterns; Feed Balancing Dial for Stitch Correction

JanomeFlyer.com
72
Programming Automatic Thread Cutting
To cut the threads automatically after sewing the pattern
combination, press and hold the thread cutter button after
programming the pattern combination.
The cutter sign will be indicated on the LCD screen and
blinks.
q Cutter sign
q
w
z Select pattern 56 (mode 3).
z
x
c
v
x Press the memory key.
c Select pattern 57 (mode 3).
v Press the memory key.
b Press and hold the thread cutter button until the cutter
sign appears.
q Cutter sign
w Thread cutter button
n Start sewing.
The machine will sew the pattern combination,
auto-lock stitch and cut the threads, then stop
automatically.
b n
q
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide