Janome Memory Craft 8200QC - PROGRAMMING a PATTERN COMBINATION Pattern Combination

JanomeFlyer.com
70
b Start sewing. Combination of patterns 56 and 57 will
be sewn continuously.
NOTE:
If you press the auto-lock button in the middle of
sewing, the machine will sew to the end of the current
pattern, sew locking stitches and stop automatically.
q Auto-lock button
PROGRAMMING A PATTERN
COMBINATION
Pattern Combination
Example:
Programming patterns 56 and 57 (mode 3).
NOTES:
•Patternsinthedifferentgroups,lettersand
numbers can also be programmed.
•Check tension balance by test sewing.
Manual tension adjustment may be required when
sewing a pattern combination.
•Upto50stitchpatternscombinationcanbe
memorized.
q
z
x
c
v
z Select pattern 56 (mode 3).
x Press the memory key.
c Select pattern 57 (mode 3).
v Press the memory key.
b
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide