75
Bridge Stitches
Stitch patterns number 46 to 50 (mode 3) are bridge
stitches, which are used to insert straight stitches after a
stitch pattern.
Example: Combination of pattern 13 and pattern 48 in
mode 3
z Select pattern 13 (mode 3).
x Press the memory key.
c Select pattern 48 (mode 3).
v Press the memory key.
q
NOTES:
The number on the right of the stitch image indicates
stitch counts to be inserted.
The stitch length and needle drop position of patterns
46, 47 and 49 in mode 3 are independent from those
of the combined pattern.
Patterns 48 and 50 in mode 3 will inherit the stitch
length and needle drop position of a previous pattern
in the programmed pattern combination.
Use patterns 46 or 47 in mode 3 with satin stitches.
q Pattern 46
w Pattern 47
Use pattern 49 in mode 3 if you wish to add straight
stretch stitches.
z
x
c
b Start sewing.
Two counts of the straight stitch are added to pattern
13.
q Bridge stitch
v
b
wq
Janome 8200 Sewing Machine Instruction Manual
MC8200 Owners Manual/ User Guide
To Next Page
Loading...
