81
Uniform Stitch Adjustment
The stitch width and length of the programmed patterns
can be uniformly adjusted.
Example 1: Adjusting the stitch width of the programmed
pattern 63 (mode 3) and its mirror image
Shift the cursor to the right of the last programmed
pattern.
Press the stitch width adjusting key to adjust the stitch
width.
NOTE:
Stitch length can be uniformly adjusted if the
programmed patterns in the same category (satin
stitches or stretch stitches) have been programmed.
The stitch width of the programmed patterns will be
adjusted uniformly.
q Original width
w Uniformly adjusted width
Unified Needle Drop Position
The needle drop position of the programmed patterns will
vary depending on the pattern combination:
(A) Unified to the left when combining the patterns with
the left needle position and the center needle
position.
(B) Unified to the right when combining the patterns with
the center needle position and the right needle
position.
(C) Unified to the center when combining the patterns
with the left needle position and the right needle
position.
(D) Unified to the center when combining the patterns
with the left, center and right needle positions.
q w
(A) (B) (C) (D)
Janome 8200 Sewing Machine Instruction Manual
MC8200 Owners Manual/ User Guide
To Next Page
Loading...
