Janome Memory Craft 8200QC - Machine Settings; Zigzag Stitch; Pattern: MODE 1; Mode 2

JanomeFlyer.com
39
Zigzag stitch is used for various sewing needs including
overcasting. It can be used on most woven fabrics.
A dense zigzag stitch can also be used for applique.
Adjusting the stitch length
The stitch length of the zigzag stitches can be altered by
pressing the stitch length adjusting key.
Press the “ ” sign on the stitch length adjusting key to
increase the stitch length.
Press the “ ” sign on the stitch length adjusting key to
decrease the stitch length.
q Stitch length
Zigzag Stitch
Machine settings
q Pattern: MODE 1: 6, 7
MODE 2: 0
8, 09
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
q
e
w
r
Adjusting the stitch width
The stitch width of the zigzag stitches can be altered by
pressing the stitch width adjusting key.
Press the “ ” sign on the stitch width adjusting key to
increase the stitch width.
Press the “ ” sign on the stitch width adjusting key to
decrease the stitch width.
q Stitch width
(A): The pattern number 6 (mode 1) or 08 (mode 2) has
a fixed center needle drop position. The stitch width
changes symmetrically.
(B): The pattern number 7 (mode 1) or 09 (mode 2) has a
fixed right needle drop position. When yo
u change
the stitch width, the left needle drop position will
change.
w Fixed right needle position
q
q
w
(A) (B)
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide