Janome Memory Craft 8200QC - Customizing Machine Settings

JanomeFlyer.com
25
Buzzer sound setting
The buzzer sound can be turned on or off using the
buzzer sound setting. The default buzzer sound setting is
“ON”.
Enter the setting mode.
To turn off the buzzer sound, press the cursor key “ ”
and the “oF” mark will blink.
To turn on the buzzer sound, press the cursor key “ ”
and the “on” mark will blink.
Customizing Machine Settings
Youcancustomizethemachinesettingstoyour
preference.
Press the set key q and LCD screen will show the setting
mode.
Press the mode key w to select the desired setting.
In this mode, you can set the following machine functions.
e Buzzer sound setting
r Needle stop position setting
t Start up speed setting
y Resetting all to default
u Key position calibration
To exit the setting mode, press the set key q.
q
w
e
r
t
y
u
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide