Janome Memory Craft 8200QC - Deleting and Duplicating Patterns; Deleting and Inserting Patterns; Duplicating Patterns

JanomeFlyer.com
69
•Stitchpatternscannotbememorizedinthetwin
needle mode.
•Usethethreadcutteronthefacecoverwhen
trimming threads.
•Usenethreads#60orlargernumberforthetwin
needle sewing.
NOTES:
•Whenyousewpatternswiththetwinneedle,test
the stitches first before you sew on the garment.
•UsethezigzagfootAorsatinstitchfootFfortwin
needle sewing.
•Whenchangingthesewingdirection,raisethe
needle and presser foot then turn the fabric.
•Whenyouselectstitchpatternsnotfortwinneedle
sewing and press the twin needle key, the twin
needle mark will blink on the LCD screen and the
caution buzzer sound.
Buttonholes and specialty stitches such as darning or
eyelet, and monogram cannot be selected.
e Twin needle key
r Twin needle icon
t Maximum width (3.0)
Select the desired pattern suitable for twin needle
sewing.
Press the twin needle key.
e
r
t
The LCD screen shows a twin needle icon and the
maximum permissible stitch width is restricted to 3.0 mm.
The needle drop position of straight stitches is restricted
to between 3.0 and 6.0.
After twin needle sewing is finished, press the twin
needle key. The twin needle icon blinks.
Replace the twin needle with a single needle.
Turn off and on the power switch or press the twin needle
key to return to the single stitch mode.
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide