Janome MO200 - Sewing Machine Service Access - Base and Bed Covers; Base Cover Removal and Installation; Bed Cover Removal and Installation

3
MO200
5200QDC
SERVICE ACCESS (2)
BASE
TO REMOVE:
1. Remove the 4 setscrew (A) and the 2 setscrew (B), remove the base.
TO INSTALL:
2. Place the part C (concave part in the illustration) between the base and the arm boss.
Install the base with the 4 setscrews (A) and the 2 setscrews (B).
BED COVER
TO REMOVE:
1. Set the drop lever to the left and remove the 2 setscrews (D), remove the bed cover.
TO INSTALL:
2. Set the drop lever to the left and install the bed cover.
Secure the bed cover with the 2 setscrews (D).
Setscrew (A)
Setscrew (B)
Setscrew (D)
Drop lever
Bed cover
Base
C part