Janson Controls FC100-2S-1.5G User Manual

22
4
CHAPTER 4 DIGITAL KEYPAD OPERATION
4.1 Description of Digital Keypad
This digital keypad includes two parts: Display panel and keypad. Display panel
provides the parameter display and shows operation status of the AC drive. Keypad
provides programming interface between users and AC drives.
UP/DOWN
Function
Display key
Data
Confirmation key
RUN/STOP
Frequency
setting knob
LED display
U/T1 V/T2 W/T3
R/L1 S/L2
T/L3
RS-485
ENTER/DISP
Shift / Enter /Switch Display Button
shift to another digit or switch to another display by short-pressing,confirm
a setting by long-pressing
PRG/RESET
Program key / fault reset button
short press for programming key, press 2 seconds for the result button
Run/Stop
Press to Start or Stop the AC drive operation. This key can only be used to Sto
p
the AC Drive when the drive is controlled by the External Control Terminals.
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
ENTER
DISP
FC
Chapter 4 Digital Keypad Operation
FC100 Series User Manaul

Janson Controls FC100-2S-1.5G Specifications

General

Brand	Janson Controls
Model	FC100-2S-1.5G
Category	Controller
Language	English