41
5. Pull the RV onto the scale so only one tire is on the scale. Record the weight. Your RV
must remain as level as possible on the scale (even though an axle or side is not physi-
cally on the scale).
6. To calculate the opposite side of the RV wheel position weight, subtract the rst side’s
weight from the weight determined in step #3.
If there is a dierence in the weights on one side of the vehicle as compared to weights on
the other side, components (tires, wheels, brakes, springs, etc.) on the heavier side could be
overloaded, even though the total axle load is within the GAWR.
Once actual weights are obtained, compare them to the weight
ratings to ensure you are below the posted minimum ratings.
See the Weight Terms and Loading Your RV sections for important weight information.
To Next Page
Loading...
Need help?
General
