892/00174 Measuring Cup - Pinion Head Bearing
4 - 11
Section 1 General Information
9803/7130
Section 1
4 - 11
Issue 1
S204180
S200170
Service Tools(cont'd)
Section F - Transmission
992/04000 Torque Multiplier (use in conjunction with a
torque wrench to give a 5:1 multiplication
when tightening pinion nuts)
993/59400 End Float Setting Tool for gearbox:
993/59401 Base Plate
993/59402 Setting Yoke
993/59403 Mainshaft Adapter (long)
993/59404 Mainshaft Adapter (short)
993/59405 Ouput Yoke Adapter Plate
993/59406 Setting Yoke Support Pillars
992/07609 Adapter - Steer/Drive Axle Pinion Bearing
Cone
892/00833 Annulus Removal Tool
892/00822 Splined Bolt Socket for driveshafts
892/00224 Impulse Extractor Set for Hub Bearing
Seals
992/00800 Extractor for removing front axle pivot pin
S197070
S188160
S197060
S197050
S190770
S197030
To Next Page
Loading...
