Section E - Hydraulics
Loader Pump
Pump
E-20 E-20
9803-9570-4
Replacement
Assemble the pump to the mounting plate and secure with
nuts and bolts D.
Position the pump assembly onto the engine, taking care
to engage the splines of the drive coupling.
Fit and tighten bolts C.
Connect the outlet hoses B to their correct adapters and
connect the suction hose A.
Refill the hydraulic tank (K
Lubricants and
Capacities ( T 3-8)).
Start the engine and run to warm the hydraulic oil. Check
for leaks.
Slide the engine back and secure in its correct position.
Refit the engine cover (if fitted).
Table 1. Torque Settings
Item Nm kgf m lbf ft
C 24 2.5 17.7
D 47 4.8 34.7
manualequipospesados@gmail.commanualequipospesados@gmail.com
To Next Page
Loading...
