Section 3 - Maintenance
Routine Maintenance
Service Schedules
3-5 3-5
9803-9570-4
Service Schedules
A badly maintained machine is a danger to the operator
and the people working around him. Make sure that the
regular maintenance and lubrication jobs listed in the
service schedules are done to keep the machine in a safe
and efficient working condition.
!MWARNING
Maintenance
Maintenance must be done by suitably qualified
personnel. Before attempting any maintenance work,
make sure the machine is safe. Park on level ground.
If it is necessary to work with the loader arms raised,
then the loader arm safety strut must be fitted as
shown in Loader Arm Safety Strut in MAINTENANCE
section.
2-3-1-1
Apart from the daily jobs, the schedules are based on
machine running hours. Keep a regular check on the
hourmeter readings to correctly gauge service intervals.
Do not use a machine which is due for a service. Make
sure any defects found during the regular maintenance
checks are rectified immediately.
Table 1. Key
Regular Maintenance Check
{
Initial Service
Service Points and Fluid Level
Checks - Engine Stopped Operation 1 Day
1
Week
1
Month
3
Months
6
Months 1 Year
ENGINE
Engine Oil Check level
Engine Oil
Change
(1)
{
Engine Oil Filter (Yanmar &
Lombardini)
Clean
(5)
Air Filter Check
Air Filter (Honda)
Clean
(2)
Air Filter (Lombardini)
Clean
(3)
Air Filter (Honda) Replace
Air Filter (Yanmar & Lombardini) Replace
Sediment Cup (Honda) Clean
Spark Plug (Honda) Clean and adjust
Spark Plug (Honda) Replace
Idle Speed (Honda)
Check/adjust
(4)
Valve Clearances (Honda)
Check/adjust
(4)
Valve Clearances (Lombardini)
Check/adjust
(5)
Fuel Tank and Filter (Honda &
Yanmar)
Clean
(4)
Fuel Filter (Lombardini) Replace
manualequipospesados@gmail.commanualequipospesados@gmail.com
To Next Page
Loading...
Need help?
General
