38
STATUS SYSTEM 8 ( 558 -- X -- ABCDEFGH -- SUB-TOT. )
A : 0 = PLU repeat doesn't send PLU request in case of external PLU
1 = PLU repeat sends PLU request in case of external PLU
B : 0 = Registration data aren't sent to PC
1 = Registration data are sent to PC
C : 0 = Registration data aren't stored into LOG memory
1 = Registration data are stored into LOG memory
D : 0 = Registration data isn't transmit by No-sale operation
1 = Registration data is transmit by No-sale operation
E : 0 = P-T-D reset are allowed by ECR
1 = P-T-D reset are allowed by PC command only
F : 0 = Keyboard entry is allowed at SLAVE mode
1 = Keyboard entry isn't allowed at SLAVE mode
G : 0 = Internal PLU mode
1 = External PLU mode
H : 0 = Internal PB mode
1 = External PB mode
Note : The configuration of the S.S.8 is important in case of ECR connected to an external
device (PC or memory box), since the S.S.8 adapted the operation of the ECR to
the operation of the external device, is fundamental that the setting of this Status
comes defined from the Software House that has developed the software to which
the ECR will be connected.
STATUS SYSTEM 9 ( 559 -- X -- ABCDEFGH -- SUB-TOT. )
A : 0 = INVOICE description printed on Slip Printer
1 = INVOICE description not printed on Slip Printer
B : 0 = INVOICE number printed on Slip Printer
1 = INVOICE number not printed on Slip Printer
C : 0 = BILL description printed on Slip Printer
1 = BILL description not printed on Slip Printer
D : 0 = BILL number printed on Slip Printer
1 = BILL number not printed on Slip Printer
E : 0 = INVOICE or BILL not compulsory
1 = INVOICE or BILL compulsory
F : 0 = Doesn't print automatically "1Q" on Slip Printer if quantity is 1
1 = Prints automatically "1Q" on Slip Printer if quantity is 1
G : 0 = PB not automatic line finder
1 = PB automatic line finder
H : 0 = Receipt printing during Slip Printer operations
1 = Not receipt printing during Slip Printer operations
To Next Page
Loading...
