JDE PRMSS-001 - Page 28

28
Error    Cause        Acon
Error code (205) No ingredient detected Check if the ingredient pack is correctly installed.
Remove the ingredient pack, shake it and place the pack back.
Clean the doser (the transparent part of the pack) with a dry cloth. >
Place a new ingredient pack.
Error code (206) Water ow error Check the water supply. Is the tap sll open?
In case a water lter is installed: Is the lever of the lter fully opened?
Contact your service provider if the error remains thereaer.
Door open (208) The door is not completely closed Please close the cooling compartment door completely.
ECO mode acve (209) The energy save mode (ECO) is acve Make your selecon and wait unl the machine has reached the operaonal temperature for drink delivery.
Machine locked (210) The machine is locked Unlock the machine by inserng the operator USB key.
Error code (211) Clean-shot (short ush aer a milk drink) could not be executed Check/empty the drip tray.
Clean the driptray sensor contacts. (see page 26)
Reset the machine : Unplug the power cord for 10 seconds
Contact your service provider if the error remains thereaer.
Error code (214) Water passed through the outlet valve in stand-by Close the water supply (or remove the water tank). Contact your service provider.
The coee strength varies The coee pack is not correctly placed and/or Check the coee pack: Shake the pack at least 10 mes.
from cup to cup and is The pack is not well shaken.
unsasfactory
The coee pack is not fully thawed / partly frozen. Allow the pack to fully thaw and/or place a fully thawed pack.
Always ensure that the pack content is fully thawed.
The posion of display buons Unplug the power cord and switch the machine on again; the machine will automacally calibrate the display.
do not fully align with the touch
screen areas