Jeep CHEROKEE 2021 - Keyless Enter-N-Go - Ignition; (If Equipped)

GETTING TO KNOW YOUR VEHICLE 19
KEYLESS ENTER-N-GO — IGNITION
(I
F EQUIPPED )
This feature allows the driver to operate the
ignition switch with the push of a button as long
as the key fob is in the passenger compartment.
The START/STOP ignition button has several
operating modes that are labeled and will
illuminate when in position. These modes are
OFF, ACC, ON/RUN, and START.
Push Button Ignition
The push button ignition can be placed in the
following modes:
OFF
 The engine is stopped
 Some electrical devices (e.g. central locking,
alarm, etc.) are still available
ACC
 Engine is not started
 Some electrical devices are available
(e.g. power sunroof, power windows etc.)
ON/RUN
 Driving position
 All the electrical devices are available
(e.g. climate controls, heated seats, etc.)
START
 The engine will start (when foot is on the
brake)
NOTE:
If the ignition switch does not change with the
push of a button, the key fob may have a low
battery. In this situation, a backup method can
be used to operate the ignition switch. Put the
nose side (side opposite of the emergency key)
of the key fob against the START/STOP ignition
button and push to operate the ignition switch.
Starting The Ignition With Depleted Key Fob Battery
1 — OFF
2 — ACC
3 — ON/RUN
2
21_KL_OM_EN_USC_t.book Page 19