TECHNICAL SPECIFICATIONS 417
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula
OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard
MS.90032.
Engine Oil – 2.0L Engine
We recommend you use Mopar API SP/GF-6 Certified SAE 5W-30 Full Synthetic Engine Oil which
meets the requirements of FCA Material Standard MS-13340. Equivalent full synthetic SAE
5W-30 engine oil can be used if it meets API SP/GF-6 Certification. If API SP/GF-6 or equivalent oil
is unavailable then please contact a local dealership for recommendation.
CAUTION!
Failure to use the recommended API SP/GF-6 or equivalent oil can cause engine damage not
covered by the vehicle warranty.
Engine Oil – 2.4L Engine
We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil
filler cap for correct SAE grade.
Engine Oil – 3.2L Engine
We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil
filler cap for correct SAE grade.
Engine Oil Filter We recommend you use a Mopar Engine Oil Filter.
Fuel Selection – 2.0L, 2.4L and 3.2L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
9
21_KL_OM_EN_USC_t.book Page 417
To Next Page
Loading...
