Pagina 36 di 47
7ā TROUBLESHOOTING
_____________________________________________________________________________________________
7.4 AUTO DIAGNOSTIC SLIM
The LMI is equipped w ith an auto diagnostic system which is ableto detect faulty pressure
transducers, or boom angle/length sensors, broken cables or internal electronic faults.
When an alarm occurs, the SLIM puts itself in a safe condition stopping the dangerous movements
and at the same time the display show s an alarm message on the first row .
According to the alarm code and message, it w ill be possible to identify the fault.
See LMI manual on attached.
https://cranemanuals.com
To Next Page
Loading...
