Page 6 of 47
1-PREFACE
_____________________________________________________________________________________________
Conventions:
Qualified technicians: people w ho have the necessary expertise, skill and know ledge concerning
the standards, safety regulations and service conditions, to recognise and avoid any possible
danger for people and damage to the processed materials and to the machine itself.
Right side: Right side of the system, as identified by the operator positioned in the back part of the
crane, in front of the sw itchboard and of the valve bank.
Left side: Left side of the system, as identified by the operator positioned in the back part of the
crane, in front of the sw itchboard and of the valve bank.
Marking
On the crane frame there is an identification plate
bearing the machine's model, manufacturing
number, year of manufacturing and w eight. Model
and number are also punched closed to the plate.
The machine is supplied CE-marked w here
required by the market. The CE marking means
that the machine meets the EU's requirements.
https://cranemanuals.com
To Next Page
Loading...
