Figure 4.7 video blind
Digital channels cannot be used to set the sensitivity. Which is a mixed-mode or full
simulation mode can set the sensitivity. Sensitivity level is divided into six kinds, namely:
minimum, low, medium, high, very high, the highest.
Setting method: refer to chapter "4.3.1."
4.3.3 video loss
When the device cannot get channel video signal, the video loss alarm, and the linkage
function.
Note: Advanced button is same to the right click.
* Same with motion detection, the Mixed-mode / full analog and digital channels of
video loss function differently.
To Next Page
Loading...