Jitterbug Flip User Manual

Additional Information
101
Pairing a Bluetooth Headset to Your Jitterbug
“Pairing” is typically a one-time set up process that allows the headset and
your Jitterbug to automatically connect every time Bluetooth is turned on. The
following will guide you on pairing a Bluetooth headset to your Jitterbug phone.
1. Refer to your Bluetooth headset manufacturer’s instructions on enabling
“pairing” mode on the headset device. Once in pairing mode, please
proceed to Step 2.
2. Starting from the Main Screen of your Jitterbug, use the Up/Down Buttons
( ) until “Settings” appears highlighted and press the YES Button ( ).
3. Use the Up/Down Buttons ( ) until you see “Bluetooth” highlighted and
press the YES Button ( ).
4. Use the Up/Down Buttons ( ) until you see “Pair” highlighted and press
the YES Button ( ).

Jitterbug Flip Specifications

General

Brand	Jitterbug
Model	Flip
Category	Cell Phone
Language	English