Getting Started
14
Charging the Battery
We’ve included a Charging Dock to make it easy for you to always have your
Jitterbug fully charged and ready to go.
Charging Using the Charging Dock
1. Plug the smaller end of the USB Cable into the back of the Charging Dock.
2. Plug the larger end of the USB Cable into the Wall Charger.
3. Plug the Wall Charger into a standard wall outlet (110/220 VAC).
4. Place the Jitterbug into the Charging Dock as illustrated.
Your Jitterbug is fully charged when you see “Charging Complete” on the
Outside Display.
To Next Page
Loading...
