Jitterbug Flip User Manual

Additional Information
106
Installing and Removing the Battery
IMPORTANT!
The battery has been pre-installed into your Jitterbug phone for your
convenience.
Removing the Battery
1. If your Jitterbug is on, turn it off by holding down the On/Off Button ( ).
2. With the back of the Jitterbug facing up, nd the Battery Cover Release at
the bottom-left corner.
3. Using your ngernail, gently lift the Battery Cover up using the Battery
Cover Release.
4. To remove the Battery, use your ngernail in the groove at the top of the
Battery, and gently pull the Battery out.

Jitterbug Flip Specifications

General

Brand	Jitterbug
Model	Flip
Category	Cell Phone
Language	English