Getting Started
18
Powering Your Jitterbug On and Off
Turning Your Jitterbug On
1. Open your Jitterbug.
2. Press and hold the On/Off Button ( ) until the Inside Display turns on.
3. When you hear a dial tone, your Jitterbug has service and is ready to use.
If a connection is not possible, a “No Service” message will appear on the
Outside Display and a dial tone will not be heard.
IMPORTANT!
If you receive an error message to call Customer Care after turning your
Jitterbug on, it may be possible that your phone has not yet been activated.
Please refer to “Activating Your Jitterbug” on page 10 for more information
on how to activate your phone.
To Next Page
Loading...
