Jitterbug Flip User Manual

Getting Started
16
Charging Without the Charging Dock
It’s also possible to charge your Jitterbug without the Charging Dock by using
the included USB Cable.
1. Plug the larger end of the USB Cable into the Wall Charger.
2. Plug the Wall Charger into a standard wall outlet (110/220 VAC).
3. Plug the smaller end of the USB Cable into the USB Connector on the side
of your Jitterbug.

Jitterbug Flip Specifications

General

Brand	Jitterbug
Model	Flip
Category	Cell Phone
Language	English