Johnson Controls TIWM006B21S - Timer Setting

24
P5417053-rev.1
Function
Ɣ This function is used to start or stop unit operation at a pre-set time.
Ɣ 7KHWLPHUVHWWLQJLVDYDLODEOHIRU217,0(DQG2))7,0(
On Timer
: The operation is started beyond the set time.
Off Timer
: The operation is stopped beyond the set time.
5.2.4 Timer Setting
1
Press “On Timer ” or “Off Timer ” switch.
By repeatedly pressing “On Timer
” or “Off Timer
”, the indication of setting time is changed.
When the transmitting indicator “
´ÀDVKHVWKH
TIMER indicator (green) (indoor units) is turned
ON and a beeping sound is heard. Timer setup is
complete.
Timer setup functions can be set at half hour
intervals up to 10 hours and at one-hour intervals
up to 23 hours after 10 hours.
Transmitting Indication
The setting time for “ON TIMER”
is set to 6 hours.