OptiView screens
Home screen
Figure 16: Home screen
The home screen display depicts a visual representation of the chiller itself. The animation indicates
the chilled liquid flow when the flow switch input is satisfied. When the chiller system is powered
on, the default display in Figure 16 appears.
Table 18: Display only fields
Field name Description
Chilled Liquid Temperature -
Leaving
The temperature of the liquid as it leaves the evaporator.
Chilled Liquid Temperature -
Entering
The temperature of the liquid as it enters the evaporator.
Outside Ambient Air
Temperature
The outside ambient air temperature
Input % Full Load Amps The percentage of full load amps used by the system
Input Power (kW) The total input power used by the system
Operating Hours The cumulative operating hours of the chiller
Table 19: Display only fields: LED
LED name Description
Motor Run LED is on when the digital output that gives the VSD a motor run command is on
45YVAM with OptiView Control Center
To Next Page
Loading...
