Johnston VT651 - Wanderhose- Powaboom option

Johnston Sweepers Limited
Chapter - Optional Equipment
Page Issue 01
OG
4:9
V Range 501 ● 651 ● 801 - Operator’s Guide
The Wanderhose is assembled as 1-3 on previous page for Wanderhose.
4. Apply the vehicle handbrake.
5. Press switch (A) to raise the unit from its stowage
position and rotate to the working position.
Press switch (B) to lower as required.
Switch (C) controls the suction as follows;
Turn clockwise to turn fan on, counter clockwise
to turn fan off.
WANDERHOSE - POWABOOM OPTION
The equipment is intended for picking up light objects such as leaves, drink cans, water, etc. and
is operated in the same way as the Wanderhose.
LITTASNATCH - OPTION
Operation
Operating the rotary switch (A) located on the rear of
the body opens the Littasnatch gate.
Note:
Ensure the hose is not twisted before operating the
valve. This will prevent it snaking around as air passes
through it.
WaterInjection
Water injection is controlled from the rear of the
machine.
Valve (A) Wanderhose
Valve (B) Littasnatch
Valve (C) Washdown
On completion of work, close the valves and re-stow
the hose.
MO2OG-045
A
C
B
MO2OG-044
A
A
B
C
M02OG-102
Preparation
VT - Twin Engine
With the auxiliary engine running in low speed, blank off the nozzle ducting in the same way
as described for Wanderhose preparation.
VS - Single Engine
Engage Hydrodrive, set engine to low speed and blank off the nozzle ducting in the same
way as described for Wanderhose preparation.
All Copyright and rights are the property of Johnston Sweepers Ltd