JP-33 SERVICE MANUAL
- -
15
Technical Support - Trouble Shooting
3. Mechanical problems
3-1. The unit squeaks during operation.
3-2. Rack jumps and rattles.
3-3. Wrinkled film.
3-4. Film exits unit at an angle.
4. Poor image quality.
4-1. High contrast.
4-2. Low contrast.
4-3. Film is milky.
4-4. Film surface is spotty.
4-5. Wet film.
4-6. Dirty film.
4-7. Film is sticking in dryer.
4-8. Film emulsion is coming off in developer.
4-9. Increased base fog.
4-10. Scratches or markings on film.
4-11. Sandy film
4-12. Developer turn dark
4-13. Strong Ammonia smell from processor.
4-14. Fixer color is milky.
To Next Page
Loading...