JP-33 SERVICE MANUAL
Technical Support - Trouble Shooting
3.3 Wrinkled film.
Caused when film jams in racks.
Check if the rack is bent or out of shape (: out of square).
efer to trouble shooting
section 3.2
Make sure racks are positioned properly.
If a film jam position is identified, make ajustments in film guides as needed or check
roller spring tension.
Check the tension of the roller spring.
Refer to trouble shooting section 1.4.
Check if Film is being inserted properly
Film should be inserted properly without tilting.
- -
26
To Next Page
Loading...