JR Venture CP - Main Blade Holder Assembly

62
4-3
MAIN BLADE HOLDER ASSEMBLY
Main Blade Holder (2)
5x13x4 Shielded Bearing (4)
3x6 mm Self-Tapping Screw (4)
2x10 mm Flat Head Screw (2)
Main Bearing Spacer, Outer (2)
Main Bearing Spacer, Inner (2)
Joint Ball (2)
3x6 mm Self-Tapping Screw (4)
2x10 mm Flat Head Screw (2)
Joint Ball (2)
Main Blade Bearing Spacer, Inner (2)
Main Blade Bearing Spacer, Outer (2)
5x13x4 Shielded Bearing (4)