JR Venture CP - Tail Pitch Control Lever Installation; Tail Boom Brace Assembly

5-5
TAIL PITCH CONTROL LEVER INSTALLATION
5-6
TAIL BOOM BRACE ASSEMBLY
69
2x8 mm Flat Head Screw (1)
2x8 mm Flat Head Screw
2x8 mm Socket Head Bolt (1)
2x20 mm Socket Head Bolt
2 mm Flat Washer (1)
2 mm Flat Washer
Steel Joint Ball (1)
Steel Joint Ball
Tail Pitch Control Lever
Snap control lever onto ball.
Tail Lever Bushing
2x8 mm Socket Head Bolt (4)
2x8 mm Socket Head Bolt (4)
2.6x15 mm Socket Head Bolt (2)
2.6x15 mm Socket Head Bolt (2)
2 mm Hex Nut (4)
2 mm Hex Nut (4)
2.6 mm Lock Nut (2)
Tail Brace Tube
2.6 mm Lock Nut (2)
Tail Brace Connector (2)
For added boom brace
strength, bond the tail
brace ends to the tube after
assesmbly with thick CA
adhesive.