JR Voyager E User Manual

ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
VOYAGER E SPECIFICATIONS
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33"
Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1
/
4
"
Main Rotor Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5
/8"
Tail Rotor Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7"
Gear Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.92:1:1.5
Speed Controller . . . . . . . NEA-300H High Frequency (included)
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . NHM-540ST (included)
Battery . . . . . . . . . . . . . . . 8.4V 2000mAh NiCad (not Included)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.0 oz– 54.7 oz
(weight will vary based on the servos used)
The JR Voyager E is the first electric helicopter to utilize the
JR 120-CCPM swashplate control system. This new system
features a lower parts count and also reduces weight for
increased precision and improve performance. The Voyager’s
lightweight, yet highly rigid frame design enables the
Voyager E to fly with power and control authority never
before seen in an electric helicopter.
* Gyro not Included.

JR Voyager E Specifications

General

Brand	JR
Model	Voyager E
Category	Toy
Language	English

Summary

Voyager E Specifications

Technical Specifications Overview

Lists key specifications like overall length, rotor diameter, and weight for the Voyager E helicopter.

Introduction, Features, and Requirements

Understanding JR CCPM Technology

Explains the JR CCPM control system, its benefits, and basic operation.

Safety and Preparation Guidelines

Covers essential safety, operating precautions, and preassembly advice.

Voyager E Features and Requirements

Highlights key features, required items, and tools for the JR Voyager E helicopter.

Helicopter Assembly and Components

Hardware and Anatomy Identification

Details hardware identification and provides an anatomical overview of helicopter parts.

Frame and Landing Gear Assembly

Covers assembly of the main frame, landing gear, and body mounts.

Rotor and Drive System Assembly

Guides installation of drive gears, rotor head, washout assembly, and tail rotor systems.

Servo and Linkage Installation

Details servo installation and connection of control rods for aileron, elevator, pitch, and rudder.

CCPM System Setup and Configuration

CCPM Software Activation and Radio Setup

Covers CCPM software activation, radio settings, and specific transmitter configurations.

Speed Controller Setup

Guides speed controller setup for optimal performance.

CCPM Linkage and Swashplate Adjustment

Details servo arm preparation, CCPM linkage, and swashplate leveling for precise control.

CCPM Mixing Adjustments

Guides on adjusting pitch-to-aileron and pitch-to-elevator mixing for stable flight.

Flight Tuning and Preflight Procedures

Main Rotor Blade Balancing and Tracking

Explains procedures for balancing and tracking main rotor blades for safe operation.

Final Servo, Pitch, and Throttle Tuning

Covers final servo adjustments, pitch/throttle curves, and radio setup for optimal flight.

Preflight Checks and Maintenance

Outlines essential preflight checks, blade tracking, and general maintenance procedures.

Parts Listing

Comprehensive Parts Listing

Provides a comprehensive list of all helicopter parts with their corresponding part numbers.