JR Voyager E - Preassembled Components

53
PREASSEMBLED COMPONENTS
The following parts included in this kit are preassembled. When repair or maintenance is necessary, refer to the diagrams below for disassembly or reassembly.
Intermediate Gear
Intermediate Gear
Bearing block
Use Threadlock
Front Tail Pulley
Make sure that the
screw engages the
flat spot of the shaft.
Body Mount
Frame Spacer
26 x 15 mm Set Screw
Left Frame Half
2.6 x 8 mm Self Tapping Screw
Right Frame Half
Front Radio Bed
Motor Plate
INTERMEDIATE GEAR ASSEMBLY
MAIN FRAME ASSEMBLY